SULPHUR
ORIGIN:TURKISH
PACKING:1250 kg BIG BAG
SPECIFICATION OF FLAKE GRANULAR SULPHUR
|
PROPERTY |
RESULT |
|
|
APPARANCE |
YELLOW |
|
|
PURITY,WT% |
99.8 |
|
|
MOISTURE,WT% |
0.014 |
|
|
PHSICAL FORM |
GRANULAR FLAKES |
|
|
ASH,WT% |
0,1 |
|
|
ORGANIC SOLID METTER,WT% |
0,03 |
|
|
ACID CONTENT,WT% |
0,0012 |
Industrial Micronized Sulfur
By our company, rubber , latex , and other industrial sectors, the industrial production of micronized sulfur to be standardized are available in different sizes .
*35 MESHIN 50 KG BAG (AGRICULTURE USE)
*50 MESHIN 1,5 KG AND 25 KG AND 50 KG BAG (AGRICULTURE USE)
*100 MESHIN 40 KG BAG, (INDUSTRIAL USE)
*LIQUIDE,IN 1LT,5LT AND 25 LT
100 Micronized Sulfur Analysis Report
chemical Analysis
Purity ( % ) 99.5 min.
Moisture (% ) 0.20 Max.
Ash (% ) 0.20 Max.
sieve Analysis
100 mesh 150 micron sieve residue (% ) 0.50 Max.
200 Micronized Sulfur Analysis Report
chemical Analysis
Purity ( % ) 99.5 min.
Moisture (% ) 0.20 Max.
Ash (% ) 0.20 Max.
sieve Analysis
200 mesh 74 micron sieve residue (%) 1.00 Max .
325 Micronized Sulfur Analysis Report
chemical Analysis
Purity ( % ) 99.5 min.
Moisture (% ) 0.20 Max.
Ash (% ) 0.20 Max.
sieve Analysis
325 Mesh 44 micron sieve residue (%) 1.00 Max .
Liquid Sulfur
mk The elemental liquid sulfur S - 80
liquid elemental sulfur , lime and salinity of the soil thawing , increasing soil acidity and lowering the pH of the soil is a product that can be applied effectively . In addition, the soil breathe and tension settings help to adjust the temperature of the soil in the colder months . High pH can not receive from the soil as a macro ( (Nitrogen Phosphorus Potash and the like) and micro ( zinc , iron , cobalt , manganese , etc.) facilitates the intake of nutrients . Is in the form of elemental sulfur to sulfate and similar forms of sulfur bound to about four times more effective.
liquid elemental sulfur , drip , sprinkler systems suitable for use with the form of elemental sulfur . Sulfur particle diameters of less than 5 microns . All of these levels, drip, sprinkler and spray ( HOLDER ) systems are readily available.
liquid elemental sulfur , total sulfur ( S) content is approximately 80% , the total rate of SO3 ( sulfurtrioxide ) corresponds to the level of 200% as the source . Due to the form of elemental S effectively used as soil amendments product. Sera does not harm vegetation . Usage varies according to the amount and nature of the soil pH level . The following table is a table to be implemented to help
The elemental liquid SO3 supply atlas Kükürt'ün total 200% level.
liquid elemental sulfur SC forms .
Soil pH level of 6.50 required to adjust to the amount of sulfur in the liquid
Packing: 1-5-10-20 liter jerry cans are on sale.
After the application starts to take effect after 2-3 weeks depending on the temperature .
Applied 20 days intervals .
Preparation of Liquid Sulfur
The elemental liquid sulfur atlas , initializing dilution (Dilution ) operation must be made in a separate container . Two three -fold dilution with water in a separate container of water drained and mixed into the diluted and the user tool . Reconstitution is performed in the product container and is not used within a few days may Stoned. Than the dose recommended way to use our company is not liable for any damages resulting from its use .
Bentonite sulfur
Soluble Granular Sulphur
Soluble GranularSulphur 90 %
Bentonite sulfur Reduced ( Degredable ) disposed of the soil due to the sulfur content of SO3
( sulfur trioxide ) in 4 weeks , depending on the form of heat which helps reduce toprakpH cynical .
, soil salinity , lime and thawing , increasing soil acidity and lowering the pH of the soil is a product that can be applied effectively . In addition, the soil breathe and tension settings help to adjust the temperature of the soil in the colder months . Due to high soil unable PHDA macro ( (Nitrogen , Phosphorus, Potash and similar ) and micro ( zinc, iron, cobalt, manganese , etc.) makes it easy to nutrient intake .
Is in the form of elemental sulfur to sulfate and similar forms of sulfur bound to about four times more effective.
The recommended quantity: 25 kg / hectare
SULPHUR SAFETY DATA SHEET
According to EC Directive 91/155/EEC
Date of issue : 01.01.2010
A. Identification of the Substance and of the Company:
Product identification
Product No : Rombic S800
Product name : Sulphur, Sulfur
Application : Used as insect protective in agricultural area and different purpose in industry
B. Composition / information on Ingredients:
CHEMICAL COMPOSITION:
Formula Hill: S CAS-No: 7704 – 34 – 9 EINECS no:2317226 HS Code:2503.00
HAZARDOUS COMPONENTS :None
C. Hazards Identification:
No Hazardous product as specified in Directive 67/548/EEC.
Nevertheless this product in common with all such products should be handled in
accordance with good industrial hygiene and safety practices.
D. First – Aid Measures:
EYES
If material enters the eye, flood immediately with cold water, if possible, ensuring eyelids
are held open.
Take the casualty to hospital for examination and treatment without delay.
SKIN
Where skin contamination occur the area should be wash in cold water until the material
is thoroughly cleaned.
INGESTION
Ignestion of product is highly unlikely in any normal circumstances.
INHALATION
If inhalation of mists, fumes or vapour causes irritation to the nose or throat,or coughing,
remove to fresh air. If symptoms persist obtain medical advice.
MEDICAL ADVICE
Treatment should in general be symptomatic and directed to relieving any effects.
E. Fire – Fighting Measures:
Use foam, dry powder or water fog. DO NOT USE water jets. Avoid spraying directly into
storage containers because of the danger of boil-over.
FIRES IN CONFINED SPACES SHOULD BE DEALT WITH BY TRAINED
PERSONNEL WEARING APPROVED BREATHING APPARATUS.
F. Accidental Release Measures:
Scrape up bulk of solid material and remove the remainder with sand or other suitable
inert absorbent material. If necessary, clean the resultant area using hot water and
detergent: absorb the washings with suitable absorbent material or sand. Do not wash
into drains.
In the case of large spills contact the appropriate authorities.
G. Handling And Storage:
Handling:
No Further Requirements
Storage:
Tightly Closed. Dry.
Storage temperature:
Product should not be over heated in storage because of the risk of fire.
H. Exposure Controls / Personal Protection:
There is no appropriate occupational exposure limit for this material. Ensure good ventilation.
If vapour, mists or fumes are generated, their concentration in the workplace air should be controlled to the lowest reasonably practicable level.
When handling materials, suitable protective clothing of an appropriate standard shouldbe worn.
Depending on the type of operation this may include:
- Visor and goggles to protect the face and eyes.
- Overalls, impervious, covering full body and limbs with legs worn over boots.
- Protective clothing should be maintained in a clean serviceable condition.
Respiratory Protection:
If operations are such that exposure to vapor, mist or fume may be anticipated, then suitable approved respiratory equipment should be worn.
Industrial Hygiene:
Change contaminated clothing. Wash hands after working with substance.
I. Physical and Chemical Properties:
Physical Form : Solid, Granular, Flake, Powder
Colour : Bright Yellow
Odour : Weak Characteristic / Sulphurous Odour
Stable PH : Stabile
Density : (at 15 ÅãC) 2,10 g/cm3 ± 0,05 - ASTM D 1298 Method : (at 115 ÅãC) 1,803 g/cm3 ± 0,05 (liquid)
Bulk Density : ~ 400 – 500 kg / m3
Melting Point : 119 ÅãC - ASTM D 127 Method
Boiling Point/Range : 444,6 ÅãC - ASTM D 86 Method
Flash Point : 206 ÅãC - ASTM D 93 Method
Autoignition Point : 232 ÅãC - ASTM D 2155 Method
Solubility in Water : Almost insoluble in 20 °C
J. Stability and Reactivity:
CONDITIONS TO AVOID : Products of this type are stable and unlikely to react in a
hazardous manner under normal conditions of use. This material is combustible.
MATERIALS TO AVOID : Avoid contact with strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS : Toxic fumes may be evolved on burning or exposure to heat.
K. Toxicological information:
EYES : Will cause irritation if material contacts eyes.
SKIN : No harmful effect for short time.
INGESTION :Unlikely to be swallowed in view of the high handling temperatures.
INHALATION : May cause irritation to eyes, nose and throat due to exposure to vapour,mists or fumes.
May be harmful by inhalation if exposure to vapour, mists or fumes resulting from thermal decomposition products occurs. (including SO₂)
The product should be handled with the care usual when dealing with chemicals.
L. Ecological information:
Take all necessary precautions against accidental spillage into soil and water.
M. Disposal Considerations:
Dispose of via authorised person/licensed waste disposal contractor in accordance with
local regulations.
N. Transport Informations:
ADR/RID : Not Applicable
UN : Not Applicable
IMO : Not Applicable
O. Regulatory information:
Not classified as hazardous for supply
P. Other Information:
This data sheet and the health, safety and environmental information it contains is
considered to be accurate as of the date specified below. We have reviewed any
information contained herein which we received from sources outside OZERSOYLAR.
However, no warranty or representation, express or implied is made as to the accuracy
or completeness of the data and information contained in this data sheet.
Health and safety precautions and environmental advice noted in this data sheet may not
be accurate for all individuals and/or situations. It is the user’s obligation to evaluate and
use this product safely and to comply with all applicable laws and regulations. No
statement made in this data sheet shall be construed as a permission, recommendation
or authorization given or implied to practice any patented invention without a valid
license. The PRODUCER shall not be responsible for any damage or injury resulting
from abnormal use of the material, from any failure to adhere to recommendations, or
from any hazards inherent in the nature of the material.
MANUFACTURER:
Turkish Petroleum Refineries Corporation ( TUPRAS )
Korfez / Kocaeli